The E. Fjeld company
offers a wide variety of sample holders and custom mounts.
We excel at providing custom solutions to solve your most
challenging microscopy requirements. Custom
configurations available upon request.
Part Number
Description
Image
CAA-MM-1
METALLURGICAL MOUNT HOLDER ~
25.4mm
Designed for mounting polished metallurgical mounts.
Samples are secured with set screw.
CAA-MM-1.25
METALLURGICAL MOUNT HOLDER ~
31.7mm
Designed for mounting polished metallurgical mounts.
Samples are secured with set screw.
CAA-MM-1.50
METALLURGICAL MOUNT HOLDER ~
38.1mm
Designed for mounting polished metallurgical mounts.
Samples are secured with set screw.
CAA-3MM-1.5
CAROUSEL HOLDER for 3-1.25" MET
MOUNTS
Multi-metallurgical mount holder configured to accept a
metallurgical standard. Standards are available for
custom configurations. Samples are secured with set
screws. Insert available
CAA-5MM-1.5
CAROUSEL HOLDER for 5-1.25" MET
MOUNTS
Multi-metallurgical mount holder configured to accept a
metallurgical standard. Standards are available for
custom configurations. Samples are secured with set
screws. Insert available
CAA-CHMM-1
1" or 1.25" INSERTS for CAROUSEL
HOLDERS
CAA-MP-2.25
SEM MOUNTING PLATFORM ~ 57.1mm
Platform designed for mounting large or multi samples on
one (1) specimen holder.
CAA-MP-1.75
SEM MOUNTING PLATFORM ~ 44.5mm
Platform designed for mounting large or multi samples on
one (1) specimen holder.
CAA-MP-1.25
SEM MOUNTING PLATFORM ~ 31.7mm
Platform designed for mounting large or multi samples on
one (1) specimen holder.
CAA-CL
SPECIMEN CLAMP
Designed for samples such as fiber, wire, foils ~ 17.5mm
CAA-MY
MOUNTING YOKE
Designed for irregular shaped samples. Two set screws.
Maximum diameter ~ 25.4mm.
CAA-CH4
CAROUSEL HOLDER ~ 4 MOUNTS
Multi sample holder for 4 ~ 12.7mm specimen mounts.
Overall diameter 31.7mm
CAA-CH8
CAROUSEL HOLDER ~ 8 MOUNTS
Multi sample holder for 8 ~ 12.7mm specimen mounts.
Overall diameter 50.8mm
CAA-SH
STRAP HOLDER
Designed for thin samples such as paper,
thin film, wires ~ 25.4mm.
CAA-MV
MINIVISE
Small vise secures irregular shaped samples up to
19mm in size
CAA-SPB
SAMPLE PREP BASE
Aluminum sample base ~ Holds 10 standard specimen
mounts.
CAA-SPC
DUST COVER ~ SAMPLE PREP BASE
Cover for CAA-SPB SAMPLE PREP BASE. Keeps samples
free from contaminates.
See Above
CAA-SVM-A
SPECIMEN VISE MOUNT (ALUMINUM)
Large vise secures irregular shaped samples
up to 38.1mm in size.
CAA-XXXX
WAFER HOLDER - 100MM
Securely holds 100mm (4 Inch) wafers for inspection
CAA-CAK
CUSTOM ACCESSORY KIT
The following custom accessories are
mounted in a wooden walnut case measuring 13” by 8”.
Accessories are available individually as priced.
SEM MOUNTING PLATFORM ~ 57.1mm
SEM MOUNTING PLATFORM ~ 44.5mm
SEM MOUNTING PLATFORM ~ 31.7mm
SPECIMEN CLAMP
MOUNTING YOKE
CAROUSEL HOLDER ~ 4 MOUNTS
CAROUSEL HOLDER ~ 8 MOUNTS
STRAP HOLDER
MINIVISE
SAMPLE PREP BASE
DUST COVER ~ SAMPLE PREP BASE
SPECIMEN VISE MOUNT (ALUMINUM)
